| |
Appliance Servers > Desktop Appliances > Motherboards > CI852C
CI852C -
Intel Celeron-M CPU
Multi-Com Ports Embedded Main Board
Intel Celeron-M CPU Multi-Com Ports Embedded Main Board
Processor :
- Optimized for Intel Pentium M/Celeron M -Dothan processor for FSB 400MHz
- 478-pin micro FC-PGA or 479-ball micro FC-BGA package
- Intel Ultra Low Voltage Celeron M CPU 600M
- Intel Ultra Low Voltage Celeron M CPU 600M /0 K
- Intel Pentium M CPU is offered 1.3/1.4/1.5/1.6/1.7/serial GHz
- Low Voltage Intel Pentium M CPU is offered 1.1/1.2/1.3/serial GHz
- Ultra Low Voltage Intel Pentium M CPU is offered 900M/1.0/1.1GHz
- Supports Intel Architecture with Dynamic Execution
- On-die, primary 32KB instruction cache and 32KB write back data cache
- On-die, 1MB second level cache with Advanced Transfer Cache Architecture
- Streaming SIMD Extension 2 (SEE2) enable break-through level of performance in multimedia applications including 3Dgraphics , video decoding/encoding , and speech recognition.
- Support for MMX technology
- Internet Streaming SIMD instructions and full compatibility with IA-32 software
- Micro-op Fusion and Advanced Stack Management
- Advanced branch prediction architecture
- Double-precision floating-point instruction enhance performance
- Voltage spec from IMVP- IV 0.700 to 1.708V provide CPU Vcore
- 400MHz ,source-synchronous FSB
- 2 x Address , 4 x Data ,12 deep in-order queue.
System Chipset list :
- Intel Mobile Chipset Intel 82852GM/82855GME and Intel 82801DB ICH4 System Chipset list:
- CPU : Intel Celeron M 600MHz(FSB400MHz)FCBGA 479 L1 32KB ,L2 0K on board
- MB chipset : Intel 82852GM and Intel 82801DB ICH4 or Intel82855GME and Intel 82801DB ICH4
- VGA chipset : Intel 8252GM/82855 Integrated Graphics chipset
- Sound Chipset : AC97 Rev:2.1 Two channel SOUND
- LAN : Intel 82540EM/82541GI/Realtek RTL8100C/RTL8110SB three type optional.
- I/O : ITE IT8712F and Fintek F81216D IO
- LVDS2 : ITE IT8712F and Fintek F81216D IO
Memory :
- Supports two double-sided DIMM with un-buffered PC 1600/2100 DDR-SDRAM
- Supports 64Mbit,128Mbit,256Mbit,512Mbite for x 8 and x 16 width devices
- Maximum of 1Gbytes of system by using 512Mbit devices(double sided)
- 852GM chipset Supports 200MHz and 266MHz DDR 64-bit data devices
- 855GME chipset Supports 200MHz and 266/333 MHz DDR 72Bit data (ECC) devices
- Supports up to simultaneous open pages
On board CPU (Default) :
- On board CPU Intel Celeron M 600MHz(FSB400MHz)FCBGA 479 L1 32KB ,L2 0K
Options select :
- 478-pin micro FC-PGA for 479-pin Intel Pentium M processor Socket
- 479-ball micro FC-BGA on board package
LVDS-1 Interface:
- Intel 852/855 chipset integrated Single or dual channel LVDS panel support up to UXGA panel resolution with frequency range from 25MHz to 112MHz per channel
- Supports data format of 18 bits LVDS interface
LVDS -2 Interface (TBD):
- NS DS90C2501 Transmitter with built-in scaler for LVDS display interface.
Complies with Open LDI and GMCH DVO specification for digital display interfaces.
- 25 to 65MHz clock in single pixel in to single pixel out operation.
- 50 to 130 MHz clock in single pixel in to dual pixel out operation.
- Support 24bit/48bit color TFT LCD with conventional and non-conventional color mappings.
- Support 16bit/32bit color TFT LCD.
- Up scaling/panel fitting supports VGA to SXGA+ output in single pixel input Mode at 640x480 ,800x600 , 1024x768 , 1400x105
Graphic / Video :
- Internal Graphics Memory Up to 64MB of dynamic video memory allocation
- Display/render frequency up to 250 MHz
- 3DvSetup and render engine , Zone rendering ,High-quality performance texture engine
- 350MHz integrated 24-bit RAMDAC , Hardware color cursor support.
- Accompanying I2C and DDC channels provided through multiplexed interface.
- Dual independent pipe for dual independent display
- Simultaneous :Same images and native display timings on each display device.
- Improved hardware motion compensation for MPEG2, all format decoder (18 ATSC formats) supported , Dynamic Bob and Weave support video streams.
Software DVD at 60 Fields/second and 30 frames / second full screen
PCI Bus Master IDE:
- Internal Graphics Memory Up to 64MB of dynamic video memory allocation
- Display/render frequency up to 250 MHz
- 3DvSetup and render engine , Zone rendering ,High-quality performance texture engine
- 350MHz integrated 24-bit RAMDAC , Hardware color cursor support.
- Accompanying I2C and DDC channels provided through multiplexed interface.
- Dual independent pipe for dual independent display
- Simultaneous :Same images and native display timings on each display device.
- Improved hardware motion compensation for MPEG2, all format decoder (18 ATSC formats) supported , Dynamic Bob and Weave support video streams.
Software DVD at 60 Fields/second and 30 frames / second full screen
Audio:
- AC-Link for Audio CODEC
- Supports AC’97 2.1
- Support for up two channels of PCM audio out
- CD-in / Mic-in / Line-in support
USB:
- Includes three UHCI host controllers that support six external ports
- Includes one EHCI high-speed USB 2.0 Host Controller that supports all Four ports
- Supports Legacy keyboard / mouse software.
IO Function:
- LPC (Low Pin Count) Interface
- Supports Hardware Monitor Controller
- Four ports 16C550 UARTs RS232 or Three ports RS232 and one port RS232/RS422/RS485
- Two ports provide RX/RTS/TX for RS232 signal leve In/out
- Supports IrDA 1.0 / ASKIR protocol
- Supports PS2 keyboard and PS2 mouse
LAN (Default Option 1 for Realtek 10/100Mb) :
- Two or one LAN port on board Realtek RLT8100C 10T/100T base for server use.
- Compliant to PCI-2.2 use RLT8100C chip set
- Supports 10Mb/s and 100Mb/s Fast Ethernet
- Supports Wake On LAN (PME) function
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Supports PXE and RPL boot function
LAN (Option 2 for Realtek 10/100/Giga bit) :
- Two or one LAN port on board Realtek RLT8110SB 10T/100T/Giga base for server use.
- Compliant to PCI-2.2 use RLT8110SB chip set
- Supports 10Mb/s and 100Mb/s and Giga bit /s Fast Ethernet
- Supports Wake On LAN (PME) function
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Supports IEEE 802.1P and 802.1Q for Qos use.
LAN (Option 3 for Intel 10/100/Giga bit ) :
- Two or one LAN port on board Intel 82540em or 82541GI 10/100/1000 Mb/s
- Integrated IEEE 802.3 10BASE-T and 100BASE-TX compatible.
- 32-bit PCI master interface
- ACPI and PCI Power management standards compliance
- Supports Full Duplex Flow Control (IEEE 802.x)
- Intel 82540EM / 82541GI for Gigatbit Ethernet controller
DIO and WDT function:
- Hardware Watch Dog Timer support can programmable 0—255 sec
- Hardware Digital Input Output provide 8 input and 8 output
Expend Interface (Option function):
- On board Industry spec PCI 104 Maximum can expend to four pcs PCI 104 card .
Expend Interface:
- One Min PCI socket for only PCI rev:2.2 interface.
Front Connector Header:
- One power switch for power on
- One power LED
- One HDD LED
- One LAN LED
- One Line-out Phone jack
- One MIC-in Phone jack
- One USB port
Others function:
- One Compact Flash Reader for IDE BUS ATA type II spec
DC 12V in (TBD for test):
- On board power DC +12V +-5% convert into system +3.3v/+12v/+5v
Front Connector Header:
- One power switch for power on
- One power LED
- One HDD LED
- One LAN LED
- One Line-out Phone jack
- One MIC-in Phone jack
- One USB port
Back Panel Connectors:
- One DC 12V in power mini den jack
- One DB-15PIN VGA and PS2 Keyboard and Mouse port
- Four or Three DB-9PIN COM ports (If have PCI 104 on board the Back Panel only Three COM ports and internal One COM port pin header)
- Two ports USB
- Two ports LAN RJ45 jack
- One port Line-out Phone jack (Share to front side Line out)
Internal connectors:
- One DC-In 2pin (2.0mm)Wafer connector
- One CPU socket-478pin or FCBGA CPU on board
- One DDR-SDRAM 184pin DIMM socket
- One LVDS1 18Bits/36Bits connector
- One LVDS2 24Bits/48Bits connector (TBD)
- One 5pin (2.0mm) wafer LVDS1 invert power connector
- One 9pin(2.54mm) pin header for COM4
- Two 10pin(2.0mm) pin header for DIO
- One 40 pin (2.54mm) IDE1 connector
- One 44 pin (2.0mm) IDE2 connector
- One 50pin CF socket
- One 4 pin (2.54mm) CD-IN Header
- One 4 pin (2.54mm) Line-in Header
- Two FAN 3pin wafer for CPU and system FAN
- One 5pin(1.25mm) IR Wafer connector
- One or Three 5pin (1.25mm) touch pad Wafer connector
- One 6 pin(1.25mm) internal Keyboard / Mouse Wafer connector
- One 4pin(2.54mm)wafer for +12V/+5V power
- One 4pin(1.25mm)wafer for I2C bus connector
- One 120pin PCI 104 plus socket
- One 124pin Mini PCI socket
- One or Two 5pin (2.54mm)USB Header
- One 4pin (1.25mm)wafer for USB
- One 2pin (2.54mm) Header JSW1 for Power switch
- One 2pin (2.54mm) Header JPL1 for Power LED
BIOS:
- Award BIOS version 6.1
- Support DMI 2.0 function
- ACPI v1.0 compliant
- APM v1.2 compliant
- Windows 9x/ME/2000 Plug and play BIOSk
- Support wake up function :
1.COM1 RI wake up
2.RTC wake up
3.LAN wake up
Appliance Servers & Embedded Systems
Broadberry offer a wide range of desktop appliance servers and embedded systems customised to your exact needs. If you would like any information on our range of appliance servers and embedded systems then feel free to click the button below to either make an enquiry or simply find out more.
|
|
