iX3-U8HR - 3U Dual Xeon Rack Mount Server

The iX3-U8HR Intel Xeon Server is a dual processor 3U rack mount server and provides a cost effective solution for primary servers, database applications and storage servers and are ideal for those requiring a combination of high capacity storage, high performance and value for money in their rack mount servers. It can support dual Intel Xeon 5000/5100 series EM64T dual core processors. Up to 32GB RAM can be housed in the 8 memory slots, dual Gigabit network ports and on-board graphics come as standard. The iX3-U8HR can have up to eight hot-swap U320 SCSI SCA hard disk drives and has an Ultra 320 SCSI RAID controller supporting RAID 0, 1, 5 and 10 .

Features

    Serial ATA Hard Drives- SATADual Xeon
  • Support for two Intel Xeon EM64T 5000/5100 Series Dual Core Processors
  • Up to 48GB Memory
  • 4 hot-swap SATA-II Drive Bays
  • On-board graphics
  • Dual Gigabit Network Controller

Specifications

Processor Up to two Intel® Xeon® "Dempsey" / "Woodcrest" (1066Mhz/1333MHz FSB) processors: Dual-Core
Chipset Intel® 5000P chipset , Intel® 6321ESB I/O Controller Hub + PXH-V, Winbond 83627HF Super I/O chip
Memory Type / Slots / Upgrade DDR2 533/667 ECC Fully Buffered / Eight 240-pin DIMM sockets / Supports up to 32GB (memory must be installed in pairs)
Graphics ATI® ES1000 controller; PCI interface 32MB frame buffer of video memory
Expansion Slots (2) PCI-E x16 slots (each with x8 signal), (1) PCI-E x8 slot (with x4 signal), (2) PCI-X 64/133MHz slots, (5) total expansion cards supported, Optional IPMI 2.0 support
Optical Drive Slim type DVD-ROM drive, Optional DVD-RW, slim type 1.44MB Floppy Drive
Hard Drive Controller PCI-X U320 SCSI RAID controller supporting RAID 0, 1, 5 and 10 (occupies 1 x PCI-X expansion slot)
Storage Up to 8 hot-swap U320 SCSI SCA hard drives (2 x 5.25” drive bays free)
Network Controller Integrated dual GbE LANs from ESB2, with Intel PHY network controller
External I/O Ports Rear: (1) PS/2 Mouse & (1) keyboard ports, (2) USB 2.0 ports, (1) 15-pin VGA port, (1) one serial port, (2) GbE and (1) 10/100Mbps RJ-45 LAN ports Front: one USB 2.0 port
Chassis Dimensions Dimensions (inch): 16.9 " (W) x 26 "(D) x 5.2"(H) Dimensions (mm): 422 (W) x 660 (D) x 132 (H) – 3U Rackmount Chassis
Power Supply EPS 12V, 3U, 650W 2+1 Redundant PSU - 100V~240V AC input
Rackmount Rails Included
Warranty 3 Year Limited

More Information

3U Dual Intel Xeon Rackmount Server

The Broadberry iX3-U8HR Dual Intel Xeon 3U rackmount server gives you a choice of configurations including processor, memory and hard drive support, please contact one of our experienced sales or technical staff who will be more than happy to discuss the options with you.

Custom Intel Servers

Our Technical Sales and Engineering department would be happy to assist in any additional requirements you may have for your specific Intel server requirements, for example if you need additional network ports, serial or parallel ports, or multiple graphics outputs, we can usually assist. We offer a wide selection of cost effective, high performance Intel rackmount servers. If you do not see an Intel rackmount server that meets your requirements we can customise an Intel rackmount server to meet almost any specification. Our experienced sales & technical staff can help you to determine the appropriate Intel rackmount server configuration for your exact requirements, for example, if you require a customised front bezel with your corporate identity, or have special installation or software installation procedures.

IPMI Remote Management

IPMI operates independently of the operating system and allows administrators to manage a system remotely even in the absence of the operating system or the system management software, or even if the monitored system is not powered on. IPMI can also function when the operating system has started, and offers enhanced features when used with the system management software.

Some key features of IPMI:

  • Remotely Monitor Power, Fan Speed, Temperature
  • Remote monitor of system intrusion
  • Remote Power Cycle (hot and cold boot)
  • Remote BIOS Control & Remote Video Output (text only)
  • KVM over IP (only available on certain models - please check with your sales representative)
  • Remote Boot device

IPMI can send out alerts via a direct serial connection, a local area network (LAN) or a serial over LAN (SOL) connection to a remote client. System administrators can then use IPMI messaging to query platform status, to review hardware logs, or to issue other requests from a remote console through the same connections. The standard also defines an alerting mechanism for the system to send a simple network management protocol (SNMP) platform event trap (PET).

System Drivers

We Pride ourselves on our Servers having more drivers available than most other Branded Servers. Drivers are available for Microsoft Windows XP & Microsoft Windows Server Editions,
Drivers are also available for various versions of Linux. Please check with your sales representative for any specific requirements.

Delivery, Configuration & Testing

Delivery, configuration and testing of your Intel rackmount server will normally be between 5 to 7 working days from receipt of order, please contact your sales representative if you have any special delivery, configuration or testing requests for your Intel rackmount server.

Celeron, Celeron Inside, Centrino, Centrino Logo, Core Inside, Intel, Intel Logo, Intel Core, Intel Inside, Intel Inside Logo, Intel Viiv, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, Xeon, and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.


Broadberry UK Office

Integration House,
61 Bideford Avenue,
Perivale,
Middlesex,
UB6 7PP

Tel:  (+44)020 8997 6000
Fax: (+44)020 8997 0199

Broadberry USA Office

501 Silverside Road,
Suite 119,
Wilmington,
DE 19809

Tel: (+1)800-496-9918
Fax: (+1)302-295-1086

broadberry - Integration House - 61 Bideford Avenue - Perivale - Middlesex - UB6 7PP
t: 020 8997 6000 f: 020 8997 0199 e: sales@broadberry.co.uk