2U Intel Dual-Xeon Rackmount Server Ti26-V8H

Ti26-V8H - 2U Dual Xeon Rack Mount Server

The Ti26-V8H Intel Xeon Server is a dual processor 2U rack mount server and provides a cost effective solution for primary servers, database applications and storage servers and are ideal for those requiring a combination of high capacity storage, high performance and value for money in their rack mount servers. It can support dual Intel Xeon 5000/5100 series EM64T dual core processors. Up to 32GB RAM can be housed in the 8 memory slots, dual Gigabit network ports and on-board graphics come as standard. The Ti26-V8H can have up to eight hot-swap Serial ATA II (SATA) or up to eight Serial Attached SCSI (SAS) hard disk drives with optional SATA-II or SAS RAID controller.

Features

Support for two Intel Xeon EM64T 5000/5100 Series Dual Core Processors
Up to 32GB Memory
8 hot-swap SATA-II / SAS Drive Bays (SAS ready backplane)
On-board graphics
Dual Gigabit Network Controller

Specifications

Processor	Up to two Intel® Xeon® "Dempsey" / "Woodcrest" (1066Mhz/1333MHz FSB) processors: Dual-Core
Chipset	Intel® 5000P chipset , Intel® 6321ESB I/O Controller Hub + PXH-V, Winbond 83627HF Super I/O chip
Memory Type / Slots / Upgrade	DDR2 533/667 ECC Fully Buffered / Eight 240-pin DIMM sockets / Supports up to 48GB (memory must be installed in pairs)
Graphics	ATI® ES1000 controller; PCI interface 32MB frame buffer of video memory
Expansion Slots	(2) PCI-E x16 slots (each with x8 signal), (1) PCI-E x8 slot (with x4 signal), (2) PCI-X 64/133MHz slots, (5) total low-profile expansion cards supported, Optional IPMI 2.0 support
Optical Drive	Optional Slim type 24x CD-ROM, DVD-ROM or DVD-RW
Hard Drive Controller	Optional SATA-II or SAS RAID controller
Storage	Up to 8 hot-swap SATA-II or SAS hard drives (SAS ready backplane)
Network Controller	Integrated dual GbE LANs from ESB2, with Intel PHY network controller
External I/O Ports	Rear: (1) PS/2 Mouse & (1) keyboard ports, (2) USB 2.0 ports, (1) 15-pin VGA port, (1) one serial port, (2) GbE and (1) 10/100Mbps RJ-45 LAN ports Front: two USB 2.0 ports
Chassis Dimensions	Dimensions (inch): 17" (W) x 26 "(D) 3.5"(H) Dimensions (mm): 432 (W) x 660 (D) x 88 (H) – 2U Rackmount Chassis
Power Supply	EPS 12V, 2U, 600W with PFC - 100V~240V AC input
Rackmount Rails	Included
Warranty	3 Year Limited

More Information

The Broadberry Ti26-V8H Dual Intel Xeon 2U rackmount server gives you a choice of configurations including processor, memory and hard drive support, please contact one of our experienced sales or technical staff who will be more than happy to discuss the options with you.

Custom Intel Servers

Our Technical Sales and Engineering department would be happy to assist in any additional requirements you may have for your specific Intel server requirements, for example if you need additional network ports, serial or parallel ports, or multiple graphics outputs, we can usually assist. We offer a wide selection of cost effective, high performance Intel rackmount servers. If you do not see an Intel rackmount server that meets your requirements we can customise an Intel rackmount server to meet almost any specification. Our experienced sales & technical staff can help you to determine the appropriate Intel rackmount server configuration for your exact requirements, for example, if you require a customised front bezel with your corporate identity, or have special installation or software installation procedures.

Custom Intel Servers

IPMI Remote Management

IPMI operates independently of the operating system and allows administrators to manage a system remotely even in the absence of the operating system or the system management software, or even if the monitored system is not powered on. IPMI can also function when the operating system has started, and offers enhanced features when used with the system management software.

Some key features of IPMI:

Remotely Monitor Power, Fan Speed, Temperature
Remote monitor of system intrusion
Remote Power Cycle (hot and cold boot)
Remote BIOS Control & Remote Video Output (text only)
KVM over IP (only available on certain models - please check with your sales representative)
Remote Boot device

IPMI can send out alerts via a direct serial connection, a local area network (LAN) or a serial over LAN (SOL) connection to a remote client. System administrators can then use IPMI messaging to query platform status, to review hardware logs, or to issue other requests from a remote console through the same connections. The standard also defines an alerting mechanism for the system to send a simple network management protocol (SNMP) platform event trap (PET).

System Drivers

We Pride ourselves on our Servers having more drivers available than most other Branded Servers. Drivers are available for Microsoft Windows XP & Microsoft Windows Server Editions,
Drivers are also available for various versions of Linux. Please check with your sales representative for any specific requirements.

Delivery, Configuration & Testing

Delivery, configuration and testing of your Intel rackmount server will normally be between 5 to 7 working days from receipt of order, please contact your sales representative if you have any special delivery, configuration or testing requests for your Intel rackmount server.

Celeron, Celeron Inside, Centrino, Centrino Logo, Core Inside, Intel, Intel Logo, Intel Core, Intel Inside, Intel Inside Logo, Intel Viiv, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, Xeon, and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.