Intel TIGH2U Carrier Grade / NEBS Compliance server



Product Overview
Broadberry Intel carrier grade server TIGH2U is a NEBS-3 and ETSI compliant, 2u carrier-grade rack-mount server designed with state of art leading CPU performance and power efficiency in a compact package. The Intel TIGH2U carrier grade rack mount server supports the Quad-Core Intel Xeon processor 5400 series based on Intel’s latest 45nm technology providing improve performance per-watt over previous-generation rackmount nebs for I/O-intensive application and workloads.
The intel TIGH2U carrier grade high performance rack mount server is perfect choice for condition where environment is tough and have limited space of central office and highly available data canters. Broadberry TIGH2U carrier grade rack mount server is also ideal for services over IP (SoIP) for the next- generation telecom applications communications networks.
The intel TIGH2U carrier grade rackmount server feature as standard building block, enable OEMs and TEMs to create their own value added solution for a range of telecom applications including unified messaging, SoIP, call control, media and signalling gateways, and operational system support. The TIGH2U 2u carrier grade rackmount server offers fire-resistant and endure intense heat, humidity, altitude and zone 4 earthquakes shocks. Sophisticated server management and Telco alarm management features provide visual, audible (optional) and SNMP event indications of faults, consistent with the rigid requirements of the telecom central office environment.
45nm Quad-Core Intel Xeon Processor 5400 Series with Extended Life Cycle Support
Broadberry intel TIGH2U carrier grade rackmount server Dual-processor platforms based on the Quad-Core Intel Xeon processor 5400 series offers high levels of computing for threaded applications, delivering eight-thread, 32- and 64-bit processing capabilities with 12 MB of L2 cache per processor. Based on 45nm enhanced Intel Core micro technology, the processor delivers up to 38-percent improvement in performance-per-watt1 over previous-generation Intel quad-core processors. It has also been confirmed to deliver up to 2x faster performance2 than Intel dual-core processors, and up to 5x increased performance3 over Intel single-core processors.
Support for Intel Advanced Technologies
The Intel TIGH2U carrier grade rackmount server supports many of Intel’s sophisticated hardware technologies, including:
- Intel Virtualization Technology4 (Intel VT) features a hardware assistance for software-based virtual environments, allowing numerous operating systems and applications to run in independent partitions. It helps reduce total cost-of-ownership by facilitating remote upgrades of applications and operating systems.
- Intel I/O Acceleration Technology5 (Intel I/OAT), supported by the server chipset, drastically improves data throughput via hardware- and software-supported I/O acceleration by reducing CPU over-head to free resources for more critical tasks. Additionally, it provides network acceleration that scales seamlessly across multiple Gigabit Ethernet (GbE) ports.
- Intel 64 Architecture6 provides flexibility for 64-bit and 32-bit applications and operating systems.
- Fully Buffered DIMM (FB-DIMM) technology enables the flexibility to optimize system for performance and capacity or for cost effectiveness and power efficiency
| Standard Features | Benefits |
| Support for two Quad-Core Intel Xeon processors 5400 series |
|
| Three-year extended life cycle support with possible extension to five years |
|
| Shallow 20-inch depth |
|
| 600W AC or DC hot-swap power supply |
|
| Telco alarm management |
|
| Two rear-panel GbE NIC (Cu) ports |
|
| Eight FB-DIMM slots (240-pin DDR2-533/667 MHz) |
|
| Drive trays for up to six hot-swap 2.5-inch SAS hard disk drives |
|
| Bay supports optical drive (purchased separately) |
|
| Up to five PCI slots for flexibility and additional I/O |
|

| Optional Features | Benefits |
| Hardware RAID 5 |
|
| Intel Remote Management Module 2 |
|
| Flash storage capability supports Intel Z-U130 Value Solid State Drive (Purchased separately) |
|
| Optional I/O modules (rear) |
|
| Additional full-height riser options for PCI-X |
|
| Order Information | Description |
| TLHA0201W |
Base model with AC power supply |
| TLHD0201W | Base model with DC power supply |

Figure 3. Intel Carrier Grade Server TIGH2U block diagram (shown as fully configured system with all optional features included)
Specification
| Processor | Environmental, continued | ||
| Type | Two (2) Quad-Core Intel Xeon processors 5400 series with 12 MB cache |
Shock, non-operating | Trapezoidal, 25 G, 170 inches/sec delta V, three drops in each direction, on each of the three axes4 |
| Front-side bus | 1333 MHz | Acoustic | Sound pressure: < 55 dBA at ambient temperatures < 24° C measured at bystander positions in operating mode |
| Chipset | Mermory | 32 GB (non-mirrored mode) | |
| Memory Controller Hub | Intel 5000P Memory Controller Hub (MCH) | Maximum memory capcitity | |
| I/O Controller Hub | Intel 6321ESB I/O Controller Hub (ICH) | DIMM slots | Eight (8) |
| Connections | Memory type | FB-DIMM technology at 533 and 667 MHz | |
| Two (2) PCI risers supporting up to five PCI slots (included) |
• One (1) low-profile riser supporting two PCIe x4 slots • One (1) full-height, full-length riser supporting three slots (two PCIe x4 [or one PCIe x8] and one PCI-X) |
Physical | |
| Additional full-height riser configuration (optional) |
PCI-X (active): Three (3) independent PCI-X slots (133 MHz max) • PCI-X (passive): Two (2) PCI-X slots (100 MHz max) and one PCI-X slot (66 MHz) on shared bus |
Height | 3.45 inches (87.6 mm) |
| GbE NIC (CU) ports | • Two (2) on base board (rear) • Two (2) via optional I/O Module (rear, optional) |
Width | 17.14 inches (435.3 mm) |
| USB 2.0 ports | • Three (3): One front/two rear | Depth | 20 inches (508 mm) |
| Storage | Regulatory Compliance | ||
| Type | SAS 2.5-inch hot-swap HDD | Safety | UL 60950-1, 1st Edition/CSA 22.2 60950-1, Low Voltage Directive 2006/95/EC, GS to EN60950-1, 1st Edition CB Certificate and Report to IEC60950-1, 1st Edition and all international deviations |
| Redundancy | RAID 1 and RAID 5 | Electromagnetic Compatibility | |
| Internal | Carrier with six HDD trays | Australia/New Zealand | C-tick, Class A |
| External | SAS port on rear supports JBOD | Canada | ICES-003, Issue 4, Class A Limit |
| Environmental | China | CCC Approval, Class A (EMC and Safety) | |
| Temperature, operating | +5° C to +40° C (41° F to 104° F) | Europe | EMC Directive, 2004/108/EC EN55022, Class A Limit, Radiated and Conducted Emissions EN55024 Immunity Characteristics for ITE EN61000-4-2 ESD Immunity EN61000-4-3 Radiated Immunity EN61000-4-4 Electrical Fast Transient EN61000-4-5 Surge EN61000-4-6 Conducted RF EN61000-4-8 Power Frequency Magnetic Fields EN61000-4-11 Voltage Fluctuations and Short Interrupts EN61000-3-2 Harmonic Currents EN61000-3-3 Voltage Flicker |
| Temperature, short-term operating (<96 hrs) |
-5° C to 50° C | International | CISPR 22, Class A Limit, CISPR 24 Immunity |
| Temperature, nonoperating | -40° C to 70° C (-40° F to 158° F) | Japan | VCCI Class A |
| Altitude | 0 to 1,800 m (0 to 5,905 ft) @ 40° C 0 to 4,000 m (0 to 13,123 ft) @ 30° C |
Korea | RRL Approval, Class A |
| Humidity, operating | 93%, non-condensing at temperatures of 23° C (73° F) to 40° C (104° F) |
Russia | Gost Approval |
| Humidity, short-term operating | 5% to 90% | Tiawan | BSMI Approval, CNS 13438, Class A and CNS13436 Safety |
| Humidity, non-operating | 93%, non-condensing at temperatures of 23° C (73° F) to 40° C (104° F) |
USA | FCC 47 CFR Parts 2 and 15, Verified Class A Limit |
| Vibration, operating | Swept sine survey at an acceleration amplitude of 0.1 G from 5 to 100 Hz and back to 5 Hz at a rate of 0.1 octave/minute; 90 minutes per axis on all three axes as per Bellcore GR-63-CORE standards |
||
| Vibration, non-operating | Swept sine survey at an acceleration amplitude of 0.5 G from 5 to 50 Hz at a rate of 0.1 octaves/ minute, and an acceleration amplitude of 3.0 G from 50 to 500 Hz at a rate of 0.25 octaves/minute, on all three axes as per Bellcore GR-63-CORE standard. 2.2 Grms, 10 minutes per axis on all three axes |
||
| Shock, operating | Half-sine 2 G, 11 ms pulse, 100 pulses in each direction, on each of the three axes7 |
||
More information
For more information on Intel TIGH2U carrier grade / NEBS Compliance server please contact one of our experienced sales or technical staff who will be more than happy to discuss the options with you.
Integration House,
61 Bideford Avenue,
Perivale,
Middlesex,
UB6 7PP
Tel: (+44)020 8997 6000
Fax: (+44)020 8997 0199
501 Silverside Road,
Suite 119,
Wilmington,
DE 19809
Tel: (+1)800-496-9918
Fax: (+1)302-295-1086


